How to check if your Trezor is genuine, model by model
Intact seal, blank backup cards, no firmware out of the box, then signed firmware and the Secure Element check on Safe 3, 5 and 7. Serials prove nothing.
To check if your Trezor is genuine, confirm the holographic seal is intact, the backup cards are blank and no firmware is installed. Then let Trezor Suite install signed firmware and, on the Safe 3, Safe 5 and Safe 7, run the Secure Element check. If any step fails, stop.
Updated 31 October 2026: new search title and summary; sections added on box contents, unofficial firmware and unauthorised sellers from Trezor’s own support article.
An evergreen guide: this desk read Trezor’s five model guides and its authentication check page on 3 October 2026. The last column is our reading.
How to check if my Trezor is genuine, model by model
| Check | Trezor’s pages, by model | Defends against |
|---|---|---|
| Holographic seal | Safe 7, 5, 3: over USB-C. Model T: over the connector. Model One: two silver seals on the box | An opened or repackaged device |
| Blank backup cards | Safe 7, 5: two blank 20-word cards; words on them mean do not use it | A pre-seeded backup |
| No factory firmware | Safe 7, 5, 3 ship without it; the Model T and Model One guides say all Trezor devices do | Firmware tampered with before shipping |
| Firmware signature | The bootloader checks it on connection | Modified firmware |
| Secure Element challenge | Safe 3, 5: OPTIGA Trust M. Safe 7: TROPIC01 and OPTIGA Trust M. Model T, Model One: none in the guides read | A counterfeit board or swapped chip |
What should be in a genuine Trezor box?
It depends on the model. Trezor’s “Is my device safe to use?” article, read on 29 October 2026, lists each box. The Safe 7 holds the device with a protective screen sticker, a USB-C cable, a “Get Started” card, two 20-word wallet backup cards, a device safety leaflet and stickers. The Safe 5 holds the device, a USB-C cable, a “Get Started” card, two 20-word cards and three stickers. The Safe 3 holds the device, a USB-C cable, a “Getting started” card, two 12-word (2023 version) or 20-word (2024 version) cards and four stickers. The Model T adds a magnetic dock; the Model One comes with a USB Type-B cable and two 24-word cards.
What happens if a Trezor has unofficial firmware?
The device warns you on its own screen. Trezor’s “Is my device safe to use?” article, read on 29 October 2026, says the bootloader verifies the firmware signature each time you connect your Trezor to a computer, and Trezor Suite “will only accept the device if the installed firmware is correctly signed by SatoshiLabs.” If unofficial firmware has been installed, the article says, the device “will flash a warning sign on its screen upon being connected to a computer.” For this and the other issues the article covers, it tells readers to contact Trezor support through its Chatbot Hal.
What changed on the Safe 7 in May 2026?
Trezor’s authentication check page says the May 2026 updates added post-quantum support: the check now also verifies an ML-DSA-44 signature from the MCU.
What if a check fails?
Do not set it up. Contact Trezor support from trezor.io, never an email link (why), and verify the Suite download too. If you have already typed your backup words into a website or app, start here.
Is a Trezor from an unauthorised seller safe to use?
Trezor advises against it. Its support article “Is my device safe to use?”, read on 29 October 2026, says: “Never buy a Trezor from an unauthorized third party, as you can never tell who may have had access to it before you.” The same article says a device from the official Trezor Shop, Trezor’s Amazon storefront or an authorised reseller “is most likely safe to use.” If you already hold a Trezor from another source, the checks in the table above still apply, starting with the seal and the box contents.
Frequently asked questions
Is there a way to test if your Trezor is genuine?
Yes. Check the seal, check the backup cards are blank, and confirm setup finds no firmware installed. Then let Trezor Suite install signed firmware. On the Safe 3, Safe 5 and Safe 7, Suite also sends a challenge that the Secure Element signs and returns with a factory-issued certificate.
Can you check if a device is genuine by its serial number?
No. Trezor says its devices have no serial numbers, as a security measure. The number on the box is a packaging serial, used to identify packaging batches if there is a packaging error. It says nothing about whether the device inside is genuine.
What should I do if a Trezor authenticity check fails?
Stop. Do not create a wallet on the device, restore a backup onto it or send funds to it. Contact Trezor support from trezor.io directly. Its guides give the same instruction for a damaged seal, pre-filled backup cards or firmware found at setup.
Crypto assets are high risk; nothing here is financial advice. Check this page against Trezor’s guide for your model.